The Company's Products, In Addition To The Basket, There Are Lifts And Other Products. So, After The Previous Several Articles On The Basket, Let's Change The Topic Today And Talk About Some Knowledge About The Elevator, Hoping That We Can Learn More Products And Expand Our Vision, Not Just Stay On The Basket, But Also Narrow Our Knowledge. Elevator, It Generally Before Leaving The Factory, Has Been Inspected And Debugged, And Its Technical Indicators Have Reached The Design Requirements. So When We Use It, We Usually Only Need To Connect The Power Supply, And Its Hydraulic And Electrical Systems Do Not Need To Be Adjusted. However, In The Use Process, We Also Need To Maintain It, So As To Extend Its Service Life. So, How To Carry Out This Work Concretely? The Following Editor Will Give You Specific Answers. The Elevator Shall Be Inspected Regularly, And The Working Pressure, Shaft Pin, Screw And Hydraulic Oil Shall Be Inspected. If The Shaft Pin And Screw Are Loose, They Shall Be Fastened In Time, And If The Hydraulic Oil Is Clean, They Shall Be Replaced Every 6 Months. In Addition, When Refueling, The Hydraulic Oil Should Be Filtered First, And The Refueling Tools Should Be Clean, So As To Avoid Foreign Matters Mixing Into The Hydraulic Oil. During Mechanical Operation Of The Lift, Rough Operation Shall Be Avoided, Which Will Generate Impact Load, Thus Damaging The Lift And Shortening Its Service Life. Therefore, The Mechanical Operation Should Be Gentle And Smooth. In Addition, The Cargo Shall Be Even And Placed In The Center Position As Far As Possible To Make The Lift Bear Even Force.