As For The High-altitude Work Basket In The Basket, It Can Be Said That, Like The Electric Basket And The Construction Basket, It Is A Kind Of Basket Widely Used. Therefore, Based On This, And In Order To Make Everyone Fully Familiar With All The Basket Products In The Website, The Following Will Focus On The High-altitude Work Basket To Learn, Mainly Related Knowledge Content, Hope You Can Get Something Out Of It. &1. Safety Lock In The Basket Of Aerial Work &Nbsp; & Nbsp; & Nbsp; In The Work Basket At Height, One Of The Parts Is Very Important, Which Is A Safety Lock. So, Let's Talk About Some Regulations And Requirements On The Safety Lock. &For This Kind Of Basket, There Must Be A Safety Lock On It. In Addition, A Safety Wire Rope Shall Be Added At The Platform Suspension Of The Basket. In Terms Of Specification And Model, It Shall Be Consistent With The Safety Wire Rope On The Lifting Mechanism, So As To Do. In Addition, Every Safety Wire Rope Must Have A Safety Lock That Cannot Be Reset Automatically. &Nbsp; & Nbsp; (2) When The Safety Lock Is Used, The Basket Shall Be Able To Play Its Role Normally. For Example, When The Sliding Speed Of The Platform Is Greater Than 25m / Min, It Shall Be Able To Play Its Role And Stop The Sliding Of The Platform Within A Distance Of No More Than 100mm. &Nbsp; & Nbsp; (3) For The User, The Security Lock Should Be Used Within The Validity Period. If It Exceeds The Usage Period, It Needs To Be Tested And Can Only Be Used After Passing The Test. Otherwise, It Cannot Be Used. &2. Safety Devices In The Basket Of Aerial Work &The Main Safety Devices In The Basket Are Safety Protection Devices And Load Limiting Devices. &Nbsp; & Nbsp; Upper Limit Limiter: It Is Generally Installed At The Position Where The Cage Is Allowed To Be Lifted. For Its Overtravel, It Should Not Be Less Than 3m. When The Cage Is Raised To The Limited Height, The Upper Limit Stopper Will Cut Off The Power Supply Immediately To Ensure Safety. &Nbsp; & Nbsp; Lower Limit Limiter: Generally Installed Before The Cage Can Touch The Buffer Device, Its Main Function Is To Automatically Cut Off The Power Supply When The Cage Falls To The Lower Limit, So As To Stop The Cage Falling, So As To Ensure The Use Safety Of The Cage And The Basket For High-altitude Operation And Avoid Accidents.