For The Hanging Basket Of Aerial Work, We Will Use The Form Of One Question And One Answer To Learn And Understand It. Because It Is One Of The Key Words Of The Website, It Must Be Carried Out, Otherwise, It Cannot Reflect Its Importance. In This Case, It's Not Too Late. Let's Start At Once. The Content Is As Follows. &1. What Are The Specific Requirements For The Safety Parts Such As Safety Belt, Safety Rope And Safety Buckle Of The Work Basket At Height? &Nbsp; For The Work Basket At Height, The Specified Requirements On The Safety Parts Such As Safety Belt, Safety Rope And Safety Lock Are As Follows: &On The Basket, A Safety Rope And A Safety Catch For The Operator To Hang The Safety Belt Shall Be Provided. On The Fixation Of Safety Rope, It Should Be Fixed On The Reliable Position Of The Building Rather Than On The Basket. In Addition, The Diameter Of The Safety Rope Should Be Consistent With The Specifications Of The Safety Buckle, So As To Do. &2. What Is The Specific Function Of The Limiter In The Basket For Aerial Work? In Addition, Whose Side Should The Safety Lock Be Tested? &The Limiter In The Basket Is Mainly Used To Control The Situation That The Basket Cannot Stop Rising Due To Circuit Problems, So As To Avoid Danger Or Accident. In General, The Safety Lock In The Basket Is Tested By A Professional Testing Organization. &The Routine Inspection Before The Operation Of The High-altitude Work Basket, If In Terms Of Safety, What Specific Work Will Be Done? &The Routine Inspection Before The Operation Of The High-altitude Work Basket Is To Check Whether The Up And Down Direction Of The Basket Are Normal, And Whether The Safety Lock In The Basket Can Be Opened And Closed Normally. And Whether The Safety Rope Is Normal Or Not. If There Is No Problem In The Above Inspection, The Work Basket Can Be Used.