&This Kind Of Hanging Basket, Which Can Be Said To Be One Of The Common And Commonly Used Types, Is Also An Important Product And Keyword In The Website, So The Understanding And Understanding Of It, At Least To Achieve A Comprehensive Level, So That We Can Have A Good Learning Effect. Therefore, Based On This Point, We Will Continue To Carry Out Its Learning Work In Order To Achieve The Above Purpose And Speed Up.   &What Is The Purpose Of Using Transformer For Distribution Box In Electric Basket? In Addition, Which Party Is Generally Responsible For The Safety Inspection Cost Of The Basket? If A Transformer Is Used On The Distribution Box In The Electric Basket, Its Function Is To Change The AC To DC For Subsequent Use. On The Supply Voltage, There Are 3.6V, 6.3V And 220V These Three Kinds. As For The Safety Inspection Cost Of This Kind Of Basket, It Is Generally Borne By The Construction Unit And Will Be Considered In The Quota.   &2. If The Parapet In The Electric Basket Is A Load-bearing Wall, How To Install It? &If The Parapet Of The Electric Basket Is A Load-bearing Wall, The Front Bracket Of The Suspension Bracket Can Be Removed, And Then It Can Be Placed Directly On The Parapet Wall. Then, A Steel Pipe Is Used To Build A Bearing Platform Behind It, Or A Thick Beam And A Thin Beam Are Added To The Rear Bracket, Which Is Also OK.   &Is There Any Specific Requirement For The Electric Control System In The Electric Basket, Including The Motor And Cable? &The Electric Control System Of Electric Basket Is A Very Important System, Because It Plays An Important Role, So It Can Not Be Ignored. Among Them, For The Motor, There Are Some Specific Requirements, Mainly For That The Starting Frequency Of The Motor Shall Not Be Greater Than 6 Times / Min, And If The Motor Operates Continuously, The Time Shall Not Be Too Long. For Its Cable, It Is Required To Take Tensile Protection Measures When Its Length Exceeds 100m.