&I'm Sure You Will Not Feel Strange About This Important Website Product And Keyword Of Basket, And You Should Also Be Familiar With And Understand It To A Certain Extent, Because The Website Has Been Explaining Relevant Knowledge In This Respect, So That You Can Have Learning Content, And Then, To Be Familiar With And Understand This Website Product Very Well. So, Based On This, Next, Through Some Specific Questions And Their Answers, Let Us Have A Further Understanding On The Basket.   &1. What Are The Main Safety Information Of The Basket? &There Must Be Some Relevant Information About The Basket, Among Which The Safety Information Is Particularly Important. Because, It Is Required To Apply For Inspection When Entering The Site. Therefore, There Will Be Such A Conclusion. In Terms Of Content, It Is Necessary To Have Inspection Report, Certificate And Annual Inspection Certificate Of Basket. In Addition, When The Basket Is Installed, The Application Form For Use Shall Be Filled In, And It Can Be Put Into Use Only After It Is Accepted As Qualified.   &Nbsp; & Nbsp; 2. Are There Any Precautions During The Use Of The Basket Brake? &In The Process Of Using The Basket Brake, There Are Some Precautions, Which Are: The Basket Brake Can Directly Press The Stop Or Emergency Stop Button, So That The Lifting Opportunity Stops Working. If Only One Side Of The Safety Lock Brake Is Used, It Will Cause The Basket To Tilt And Other Problems, Thus Increasing The Risk Factor.   &What Is The Balance Weight Of The 3.6m Basket? In Addition, What Are The Specific Requirements For The Platform Of Electric Basket? &The 6-meter Basket Is Normally 900 Kg In Configuration. However, Strictly Speaking, The Decisive Factor Is Not The Length Of The Worktable, But The Load Of The Basket. In Addition, The Reference Standard Is Gb19155-2003.   &The Platform Of Electric Basket Has A Certain Range In Width, Which Is 0.8-1m, And Cannot Exceed 6m In Length. When The Base Plate Is Wood Plate, The Thickness Of Wood Plate Shall Not Be Less Than 50mm. If The Steel Plate Is Used, There Should Be A Certain Anti-skid Structure Or Measures To Prevent Personnel From Slipping On It.