&The Electric Hanging Basket Is One Of The Common And Common Types Of Hanging Basket, And It Is Often Seen In The Construction Site. Therefore, This Kind Of Hanging Basket Has A Wide Range Of Applications, Which Should Be Fully Understood, So That We Can Know What It Is, And To Correctly Operate And Use It Reasonably, And To Obtain Good Use Effect And Economic Benefit. In Order To Achieve These Learning Effects, The Following Is To Learn And Understand The Electric Basket.   &1. Test Requirements For Electric Basket &According To The Test Requirements Of The Electric Basket, Wuxi Huake, The Manufacturer Of The Electric Basket, Mainly Includes:   &The Daily Maintenance Of The Electric Basket Shall Be Completed In Accordance With The Requirements Specified In The Operation Manual. During The Test, The Electric Basket Shall Not Work With Defects. If The Vulnerable Parts In The Basket Are Damaged, They Shall Be Replaced In Time, Without Delay, And The Damaged Parts Shall Not Be Used Continuously.   &Reliability Test Of Electric Basket &The Reliability Test Of The Electric Basket Is Also An Important Test. Its Specific Regulations And Requirements Are Not Very Many And Complex, According To Wuxi Huake, The Manufacturer Of The Electric Basket. Therefore, The Summary Is As Follows:   &The Number Of Reliability Tests Shall Not Be Less Than 3000 Times Within The Weight That The Platform Can Bear And When The Lifting Height Is Not Less Than 5m. In Addition, The Lifting Test Should Be Repeated. For Safety Lock Rope, The Test Times Shall Not Be Less Than 30. In Addition, To Carry Out Manual Sliding Test, The Number Of Times Shall Not Be Less Than 50 Words, And Each Sliding Distance Shall Not Be Less Than 2m.   &How To Keep The Electric Basket Stable In The Air? &In Order To Keep The Electric Basket Stable In The Air, It Is Necessary To Keep The Steel Wire Rope Perpendicular To The Ground And Not Inclined During The Working Process. In Addition, Wuxi Huake, The Manufacturer Of Electric Basket, Pointed Out That When The Basket Is Lifted In Place, It Should Be Confirmed Whether It Is Firmly Fixed With The Building, And Only After It Is Confirmed To Be Correct Can It Be Put Into Operation.